In our time, the problem with housing has become as once relevant. Young couples, married, basically decide to live in a rented apartment. But more often than not, it’s just not possible to linger long in one place, so you have to constantly transport different things, including a boiler, - if it is. It is clear that tightly fixing it in someone else's apartment does not make much sense, but what to do if there is a boiler, but because of constant moving, it is impossible to use it. This is where a device similar to a stool will help, it will be the basis for installing a boiler. Thanks to this design, the boiler can be easily removed and installed in a short time.The base frame is made of wooden beams. The two main beams, on which the boiler itself is attached, must be thick enough to support a weight of 120 kilograms. At the top of these bars is drilled a hole for the fastening eyes of the boiler. Others supporting bars, can be of smaller section, the main thing that the design was sustainable. Bars are interconnected by means of screws, pre-drilling holes for their landing. They should be a little smaller in diameter than self-tapping screws. To make the design even more stable, a profile and additional tensioning plates are used. They are also fastened with wood screws.Since different models of boilers have different sizes, the construction data are not given here . This should be done in the course of work. When the chair is ready, we put a boiler on it, opposite the holes in the main bars, and fix it with the help of long bolts. Where the boiler is in contact with a wooden case basis, you need to substitute pieces of rubber.
Weather in St. Petersburg in March 2017. The most accurate weather forecast for the beginning and end of March for St. Petersburg
Competent approach to buying household appliances
Visualization of desires